View as  
 
  • 40% Bronze Powder Filled Teflon PTFE Tube, this bronze powder filler has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has poor chemical resistance in the presence of acids and alkali. Bronze powder filled PTFE is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat

  • If your application demands good thermal and electrical conductivity, 60% Bronze Filled PTFE Tube may be ideal. Adding bronze to PTFE also improves wear resistance. However, bronze attenuates the non-stick properties and chemical inertness of the PTFE, so you should consider whether these are important for your particular situation. Other metals such as titanium, nickel, or stainless steel (as described above) may also be chosen as fillers due to their specific properties

  • 55% Bronze Powder Filled Teflon PTFE Tube, this bronze powder filler has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has poor chemical resistance in the presence of acids and alkali. Bronze powder filled PTFE is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat With 5% MoS2 filled shows the same pressure resistance as glass-filled PTFE but uses MoS2 as a lubricant. Molybdenum also increases hardness and decreases wear

  • 40% Bronze Powder Fillded PTFE is the most common metal filler, it is dark brown in color. Bronze filler has excellent wears, creep resistance, and higher thermal conductivity than glass fiber with PTFE. Adding bronze in percentages 60% can increase wear PTFE resistance. PTFE with Bronze filled has poor chemical resistance in the presence of acids and alkali. PTFE Bronze Filled part is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speeds rubbing contact points where bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat. Used in hydraulic systems, nice for linear bearing,slides, guide ways, bearing rings, piston rings and wear pads., etc

  • 60% Bronze Powder Filled PTFE is the most common metal filler, it is dark brown in color. 60% Bronze Powder Filled PTFE Moulded sheet has excellent wears, creep resistance, and higher thermal conductivity than glass fiber with PTFE. Adding bronze in percentages 60% can increase wear PTFE resistance. PTFE with Bronze filled has poor chemical resistance in the presence of acids and alkali. PTFE Bronze Filled part is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speeds rubbing contact points where bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat. Used in hydraulic systems, nice for linear bearing,slides, guide ways, bearing rings, piston rings and wear pads., etc

  • 40% Bronze filled PTFE Rod Bar contains a copper/tin alloy providing a better creep resistance than most of the PTFE alloys. It exhibits improved thermal conductivity, with high load bearing capacity and hence is most often used in hydraulic systems. 40% Bronze filled PTFE Rod Bar is both thermally and electrically conductive. The bronze enhances dimensional stability due to improved hardness, compressive strength and resistance to creep. Bronze filled PTFE is not to be used in contact with oxidizing agents.