25% Glass Fiber Filled Teflon PTFE Tube reinforced with 25% glass fibres depending on the needs of the application. Glass fiber is used as a PTFE filler as it offers much improved compression and wear properties. The material may also be inert gas sintered to further improve creep properties and reduce porosity and gas permeability (there would be a consequent loss of tensile properties)
15% Graphite Filled PTFE Tube has exceptional chemical resistance to corrosive environments and it is compatible with the most hydraulic fluids.Graphite Filled PTFE exhibit good initial wear and rubbing/sliding characteristics in dry and water applications. Excellent performance when used for hydraulic or pneumatic compression type rod and piston seals, bearing bands and rotary applications. Graphite is commonly blended with carbon and PTFE (Teflon)
We are the manufacturer and supplier of Modified PTFE in Ningbo, China. Modified PTFE supplied by us kaxite for Excellent seal and seat material, low deformation under pressure,very low permeation, Excellent chemical and temperature resistance and high purity.
We are the manufacturer and supplier of PEEK Filled PTFE Tube in Ningbo, China. PEEK (Polyether ether ketone) is a semi-crystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. The addItion of PTFE provides advantages as below!
We are the manufacturer and supplier of 25% Glass Filled Red Pigment PTFE Teflon Tube. This was the first commercially available reinforced PTFE and is still quite popular. 25% Glass Filled Red Pigment PTFE Teflon Tube offers the best combination of flexibility and load-carrying properties. It has high wear resistance, low friction, and good electrically insulative and chemical properties. Since, its fillers are ceramic in nature, mating surfaces should be harder. It is and used in seals, piston cups, and some bearing
Alumina or aluminum oxide is an excellent electrical insulator and is used to improve mechanical properties of compounds used in high voltage applications. As it is very hard, machining of the sintered part should be avoided whenever possible. We are the leading manufacturer, supplier and trader of Aluminum Oxide filled PTFE Tube
