Style KXT PG120 Bronze Filled Ptfe Teflon Bearing Guide Strip
Bronze Filled PTFE Bearing Strip Teflon Guide Tape owing to the low friction of fluorocarbon resin (PTFE), corrosion resistance, thermal stability and other excellent properties, has been widely used in friction, sealing parts, especially in the corrosive medium, and the problem is often difficult to be solved by general metal and other non-metallic materials. The elasticity and toughness of fluorocarbon resin to become excellent sealing material, especially when it is further through a variety of filling modification and some aromatic resin composite plastic alloy, can obtain the higher bearing capacity, thermal mechanical stability, abrasion resistance and the limit PV value.
Bronze Filled PTFE Bearing Strip Teflon Guide Tape plays a guiding role, in order to prevent the cylinder and piston rod wear, highly wear-resistant, low friction, heat resistant, resistant to chemical corrosion, allow any foreign body is embedded in the guide wear ring, to prevent the particles on the cylinder and seal loss, can absorb vibration performance, and has excellent wear resistance and good dry dynamic characteristics
Material: PTFE + 40% Bronze powder
Temperature: -60°C to +150°C
Elongation at break: ≥ %150
Standard denstity: 2.4-3.25
Tensil strength: ≥15 mpa
Advantages
• Excellent wear resistance and good performance of the dry line
• Compatible with most of the fluids in contact
• Low friction of fluorocarbon resin (PTFE)
• Easy assembly, low friction coefficient.
• Obtain the higher bearing capacity
• Very good temperature resistance
• Resistant to chemical corrosion
• Good corrosion resistance
• Durability usage
• Dry use
Application
• Piston and rod bearing application
• Hydraulic cylinder
• Pneumatics
• Press.,etc
Kinds of guide strips
Material |
Compressive Strength (max) |
Max Surface Speed |
Mating Surface |
Size Availability |
General Uses |
Bronze Filled PTFE |
15 MPa at 25oC 12 MPa at 80oC 8 MPa at 120oC |
15.0m/s |
Steel Hard Chrome, Steel Hardened |
Kinds of size |
Light load, lubricated environment |
Carbon Filled PTFE |
15 MPa at 25oC 12 MPa at 80oC 8 MPa at 120oC |
Stainless Steel, Hard Anodised Aluminium |
Light duty, can run dry |
||
Phenolic (Fabric Composite) |
300 MPa at 25oC (Static) 50 MPa at 60oC (Dynamic |
1.0m/s |
Steel Hard Chrome, Steel Hardened |
10mm to 1500mm (Rod Dia) |
Heavy load, lubricated environment |