40% Bronze Powder Filled Teflon PTFE Bearing Wear Tape

Style KXT PG120 40% Bronze Powder Filled Teflon PTFE Bearing Wear Tape

40% Bronze Powder Filled Teflon PTFE Bearing Wear Tape owing to the low friction of fluorocarbon resin (PTFE), corrosion resistance, thermal stability and other excellent properties, has been widely used in friction, sealing parts, especially in the corrosive medium, and the problem is often difficult to be solved by general metal and other non-metallic materials. The elasticity and toughness of fluorocarbon resin to become excellent sealing material, especially when it is further through a variety of filling modification and some aromatic resin composite plastic alloy, can obtain thehigher bearing capacity, thermal mechanical stability, abrasion resistance and the limit PV value.

40% Bronze Powder Filled Teflon PTFE Bearing Wear Tape plays a guiding role, in order to prevent the cylinder and piston rod wear, highly wear-resistant, low friction, heat resistant, resistant to chemical corrosion, allow any foreign body is embedded in the guide wear ring, to prevent the particles on the cylinder and seal loss, can absorb vibration performance, and has excellent wear resistance and good dry dynamic characteristics

Material: PTFE + 40% Bronze powder

-60°C to +150°C

Elongation at break: ≥ %150

2.4-3.25

Tensil strength: ≥15 mpa

Advantages

Application

• Piston and rod bearing application

• Hydraulic cylinder

• Pneumatics

• Press.,etc