60% Bronze Filled PTFE Tube

60% Bronze Filled PTFE Tube

If your application demands good thermal and electrical conductivity, 60% Bronze Filled PTFE Tube may be ideal. Adding bronze to PTFE also improves wear resistance. However, bronze attenuates the non-stick properties and chemical inertness of the PTFE, so you should consider whether these are important for your particular situation. Other metals such as titanium, nickel, or stainless steel (as described above) may also be chosen as fillers due to their specific properties

Send Inquiry

Product Description

60% Bronze Powder Filled Teflon PTFE Tube


Style KXT BU980-60 60% Bronze Powder Filled Teflon PTFE Tube

60% Bronze Powder Filled Teflon PTFE Tube, this bronze powder filler has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has poor chemical resistance in the presence of acids and alkali. Bronze powder filled PTFE is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat


Advantages:

 The best wear properties of any filled PTFE
 Very heavy – high specific gravity
 Extremely hard wearing material

 Great deformation strengths

 Good thermal conductivity

 Electrically conductive

 

Application:

 Linear bearings

 Hydraulic seals
 Extrusion rings

 Piston Rings

 Guide ways

 Wear pads

 Bushings

 Bearings

 Sliders


Data sheet

Property

Test Method

Values

Specific Gravity

ASTM D 4894

3.9g/cm3

Tensile Strength

ASTM D 4894

10-15 mpa

Elongation

ASTM D 4894

100-150%

Shore D Hardness

BS EN 13000-2

65-70

Temperature Range

-

-200 oC - 260 oC

Material

-

60% Bronze powder +PTFE

Hot Tags: 60% Bronze Filled PTFE Tube supplier, 60% Bronze Filled PTFE Tube manufaturer, 60% Bronze Filled Teflon PTFE Tubes,China 60% Bronze Filled PTFE Tube suppliers