55% Bronze with 5% MoS2 filled PTFE Tube

55% Bronze with 5% MoS2 filled PTFE Tube

55% Bronze Powder Filled Teflon PTFE Tube, this bronze powder filler has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has poor chemical resistance in the presence of acids and alkali. Bronze powder filled PTFE is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat With 5% MoS2 filled shows the same pressure resistance as glass-filled PTFE but uses MoS2 as a lubricant. Molybdenum also increases hardness and decreases wear

Send Inquiry

Product Description

We are the manufacturer and supplier of 55% Bronze filled and 5% MoS2 filled PTFE. Our product range includes PTFE, PTFE Moulding Parts, PTFE Filled Grade, PTFE Machined Parts, PTFE Bellow Seals and Faces

55% Bronze Powder Filled Teflon PTFE Tube, this bronze powder filler has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has poor chemical resistance in the presence of acids and alkali. Bronze powder filled PTFE is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat


With 5% MoS2 filled shows the same pressure resistance as glass-filled PTFE but uses MoS2 as a lubricant. Molybdenum also increases hardness and decreases wear



Advantages:

• The best wear properties of any filled PTFE

• Very heavy – high specific gravity

• Extremely hard wearing material

• Great deformation strengths

• Good thermal conductivity

• Electrically conductive


Application:

• Linear bearings

• Hydraulic seals

• Extrusion rings

• Piston Rings

• Guide ways

• Wear pads

• Bushings

• Bearings

• Sliders


Data sheet

Property

Test Method

Values

Specific Gravity

ASTM D 4894

3.85g/cm3

Tensile Strength

ASTM D 4894

10-15 mpa

Elongation

ASTM D 4894

100-150%

Shore D Hardness

BS EN 13000-2

66-70

Temperature Range

-

-200 oC - 260 oC

Material

-

55% Bronze+ 5% mos2

Hot Tags: 55% Bronze with 5% MoS2 filled PTFE Tube,China, suppliers, manufacturers, factory, wholesale, made in China